Anchor Brand ANCHOR E71T-GS .030X25 (25# SPOOL)

Make sure your power source is set properly for a good, non-porous weld

Do not have to use a shielding gas

E71T-GS operates on DC straight polarity (DCEN)

E71T-GS produces smooth arc action, low spatter, full slag coverage, and easy slag removal

Item Code: 100-E71T-GS-030X25

Minimum Order Quantity: 25

Anchor Brand ANCHOR E71T-GS .030X10 (10# SPOOL)

Make sure your power source is set properly for a good, non-porous weld

E71T-GS operates on DC straight polarity (DCEN)

Do not have to use a shielding gas

Bead appearance is not equal to a gas-shielded product, but the benefits of not having to use g

Item Code: 100-E71T-GS-030X10

Minimum Order Quantity: 10

Anchor Brand ANCHOR 7018MR 3/32X5LB ELECTRODE

Welds on AC or DC reverse polarity

X-Ray quality welds

Great for medium grade carbon and cold rolled steels

All position, iron powder type electrode

Item Code: 100-7018-3/32X5

Minimum Order Quantity: 5

J.W. Harris HA 4043 3/64 1# (HAR PKGONLY)

Produced with strict attention to level-layer-winding procedures and control of cast and helix

Aluminum is thoroughly cleaned to ensure removal of all surface oxides and residual lubricants

Item Code: 348-0404321

Anchor Brand ANCHOR 7018AC 3/32X5LB ELECTRODE

Formulated to run especially smooth on AC only power sources

Great for medium grade carbon and cold rolled steels

X-Ray quality welds

All position, iron powder type electrode

Item Code: 100-7018AC-3/32X5

Minimum Order Quantity: 5

Peterson Fluxes PE 1 BLUE FLUX (1LB JAR)

Cleans fast and bonds extra strong to dirty, rusty, burnt casting

For brazing steel, malleable and cast iron, welding brass, bronze and copper

Item Code: 345-1

J.W. Harris HA BRIDGET SOLDER 1/8 1#

Acceptance by the National Sanitation Foundation

The strength of a Bridgit joint far exceeds the burst pressure of copper tubing

Bridgit caps like no other lead-free solder and allows its operator to fill both tight and loos

Nickel-bearing Bridgit® is the strongest lead-free solder developed for use on potable water s

Item Code: 348-BRGT61

J.W. Harris HA SS15 050X1/8X20 1#61035

This low cost alloy is suitable for most copper-to-copper or brass joints where good fit-up exi

Not recommended for brazing steel or nickel alloys

Serve as "self-fluxing" agents in joining copper to copper

Primarily used to join copper to copper, copper to brass, and brass to brass

Item Code: 348-15620F1

Anchor Brand ANCHOR BRONZE 1/8X36 1LBTUBE

This alloy also possesses high tensile strength and good ductility

This brazing rod has a low melting point making it easily machinable and excellent for sheet me

Preheating is recommended for some applications and a bronze brazing flux is required if the ro

Its low fuming characteristic and good mechanical properties make this alloy a widely used gene

Item Code: 100-BRZ-1/8X36X1

Anchor Brand ANCHOR BRONZE FLUX CT 1/8X36 1LB

Low fuming bronze flux coated is a general-purpose, copper base alloy brazing rod used extensiv

Comes with a flux coating so no additional flux is required. Preheating is recommended for some

It's low fuming characteristic and good mechanical properties make this alloy a widely used gen

Item Code: 100-BRZ-FLX-1/8X36X1

Anchor Brand ANCHOR BRONZE 3/32X36 1LB TUBE

This alloy also possesses high tensile strength and good ductility

This brazing rod has a low melting point making it easily machinable and excellent for sheet me

Preheating is recommended for some applications and a bronze brazing flux is required if the ro

Its low fuming characteristic and good mechanical properties make this alloy a widely used gene

Item Code: 100-BRZ-3/32X36X1

Peterson Fluxes PE 2 HIGH HEAT FLUX (1LBJAR)

Cleans fast and bonds extra strong to dirty, rusty, burnt casting

For brazing malleable and cast iron casting in medium and high heat

Item Code: 345-2

Anchor Brand ANCHOR 1/8 FLUX COATED BRONZE

Low fuming bronze flux coated is a general-purpose, copper base alloy brazing rod used extensiv

Comes with a flux coating so no additional flux is required. Preheating is recommended for some

It's low fuming characteristic and good mechanical properties make this alloy a widely used gen

Item Code: 100-BRZ-FLX-1/8X36

Minimum Order Quantity: 10

Markal 2 OZ. REGULAR FLUX PASTESOLDER

Water soluble for faster flushing from pipe lines

Use with all common soft solders including: tin-silver, 96/4, 94/6, 95/5, 50/50, 40/60 and 60/4

Non-acid, non-toxic, lead free

Contains no zinc chloride

Item Code: 434-22101

J.W. Harris HA DYNAFLOW 050X1/8X20 1#

Not recommended for brazing steel or nickel alloys

Medium range alloy that is suitable where close fit-up cannot necessarily be maintained

Serve as "self-fluxing" agents in joining copper to copper

Primarily used to join copper to copper, copper to brass, and brass to brass

Item Code: 348-D620F1

Markal 4OZ REGULAR FLUX PASTE

Water soluble for faster flushing from pipe lines

Use with all common soft solders including: tin-silver, 96/4, 94/6, 95/5, 50/50, 40/60 and 60/4

Non-acid, non-toxic, lead free

Contains no zinc chloride

Item Code: 434-22104

Metals DWOS .185 LEAD WIRE

Item Code: 612-LEAD-WIRE

Markal 4-OZ. BIC REGULAR FLUX PASTE

Water soluble for faster flushing from pipe lines

Use with all common soft solders including: tin-silver, 96/4, 94/6, 95/5, 50/50, 40/60 and 60/4

Contains no zinc chloride

Non-acid, non-toxic, lead free

Item Code: 434-22194

Anchor Brand ANCHOR RG45 1/16" 36" X10# BOX

You do not need a flux when brazing with this product

It is a great selection when ductility and machinability are most important

General purpose, copper coated, gas welding rod used for welding low carbon steels up to ¼? th

Item Code: 100-RG45-1/16X36

Minimum Order Quantity: 10

Markal 2OZ SILVER BRAZING FLUXPASTE 22302

Powerful cleaning action reduces waste of expensive silver solders

Use with torch, furnace, resistance or induction heating

Item Code: 434-22302